工程机械整机及零部件专业制造公司
亚泰机械
您现在的位置:
Homepage
>
>
>
Method of making the oil tank of loader

Method of making the oil tank of loader

  • Categories:公司新闻
  • Author:
  • Origin:
  • Time of issue:2020-06-18
  • Views:0

(Summary description)装载机油箱设计有隔板,其目的在于使吸油区和回油区隔开,防止从系统回来的油再次直接被油泵吸入,从而防止污物、气泡进入系统, 造成设备的损坏,缩短设备的使用寿命,从系统回来的油经回油管进入油箱的回油区

Method of making the oil tank of loader

(Summary description)装载机油箱设计有隔板,其目的在于使吸油区和回油区隔开,防止从系统回来的油再次直接被油泵吸入,从而防止污物、气泡进入系统, 造成设备的损坏,缩短设备的使用寿命,从系统回来的油经回油管进入油箱的回油区

  • Categories:公司新闻
  • Author:
  • Origin:
  • Time of issue:2020-06-18
  • Views:0
Information

Loader with diaphragm tank design, its purpose is to make the oil absorption and return oil is separated, prevent from the system back again directly in the oil pump, oil to prevent dirt, bubble into the system, causes the damage of equipment, shorten the service life of equipment, returned from the system return hose into the tank back to the oil, the oil in the block by the diaphragm, oil level rise after the overflow bypass baffle plate, back in the oil pump, so that large particles of dirt by baffle block in the region, however, the traditional baffle plate and the flow of the tank wall gap is too small, if oil velocity, flow a lot of noise, while crossing the barrier or tank deformation, As a result, the flow gap between the baffle and the tank wall is smaller, which makes the interference between the baffle and the tank wall cause abnormal noise of the tank.

Scan the QR code to read on your phone

亚泰机械

山东亚泰机械有限公司是一家集设计开发、生产制造、销售服务(进出口)于一体的工程机械、农业机械、港口机械整机及零部件专业制造公司。

联系我们

公司地址:

山东省潍坊市青州市南环路12868号

联系电话:

400-0536-626

公司邮箱:

itcenter@sdyat.com

手机官网

亚泰机械

Copyright ©2020 山东亚泰机械有限公司    鲁ICP备19029550号-2    网站建设:中企动力 潍坊